Et samlet bibliotek af IFC eksporteringsværktøj til Revit 2012 – 2015
IFC eksport for Autodesk Revit
08 onsdag okt 2014
IFC exporter opdateringer for Autodesk Revit 2013 og 2014 – igen
14 tirsdag jan 2014
Tags
Det er ikke andet end 4 dage siden jeg har opdateret mine IFC eksporter for Revit 2013 og 2014 og nu er der allerede nye opdateringer igen.
Nu er det nok ikke fordi Autodesk er ud med opdateringerne så hurigt igen men fordi jeg har været lidt sent med de sidste opdateringer.
Hvis du sidder med en Revit architecture, structure eller MEP er det også disse opdatering du skal bruge.
God arbejdslyst.
2013:
IFC Exporter for Revit 2013 (v2.16):
IFC Export Alternate UI for Revit 2013 (v1.16):
2014:
IFC Exporter for Revit 2014 (v3.8):
IFC Export Alternate UI for Revit 2014 (v2.8):
Updates from the previous versions are listed below. Please upgrade to the newest versions!
What’s new for IFC Exporter for Revit v2.16/v3.8:
| New Functionality
– Allow the user to specify the name of one field that will serve as a classification. – Allow the user to specify which phase to export, instead of defaulting to the last phase. – Unlimited number of generic “ClassificationCode (x)” fields (up from 10). Bug Fixes – Always export OmniClass information if it exists, even if another classification is always provided. – (2014 Only) Export some missing BRep IfcOpeningElements when a wall split by level had an insert that spanned multiple levels. – (2014 Only) IFC4: don’t export obsolete IfcRelOccupiesSpaces; use IfcRelAssignsToActor instead. |
What’s new for IFC Export Alternate UI for Revit v1.16/v2.8:
| New Functionality
– Add “Classification Field Name” to Classification tab in Assignments. This allows a user to specify the name of one field that will serve as a classification. – Add “Phase to Export” UI to allow user to choose which phase to export. This field is grayed out if exporting the current view. Note that this does not apply to rooms or spaces – that will be in the next update. Bugs – Fix “Duplicate” button in the export setup dialog to respond to left-clicking. |
10 fredag jan 2014
Tags
Her er den nyeste IFC Exporter for Revit fra Autodesk
2013:
IFC Exporter 2013 (v2.15.1):
http://apps.exchange.autodesk.com/RVT/Detail/Index?id=appstore.exchange.autodesk.com%3aifcexporterforrevit%3aen
IFC Export Alternate UI for Revit 2013 (v1.13):
http://apps.exchange.autodesk.com/RVT/Detail/Index?id=appstore.exchange.autodesk.com%3arevitifcexportalternateui%3aen
2014:
IFC Exporter 2014 (v3.7.1):
http://apps.exchange.autodesk.com/RVT/Detail/Index?id=appstore.exchange.autodesk.com%3aifcexporterforrevit2014%3aen
IFC Export Alternate UI for Revit 2014 (v2.5):
http://apps.exchange.autodesk.com/RVT/Detail/Index?id=appstore.exchange.autodesk.com%3arevitifcexportalternateui2014%3aen
What’s new for IFC Exporter for Revit v2.15.1/v3.7.1:
New Functionality
– Create IfcTelecomAddress containing the primary e-mail address of the user if it is set via the alternate UI.
– Major improvements on exporting correct values for parameters, including:
– Continuing cleanup of code to make adding new parameters easier.
– Limited support for currency, based on supported values in Revit. Some shared currencies (e.g., dollar, krona) may not always have the right locale set.
– Improve scaling for parameter values on export to respect offset values, primarily for temperature.
– Separate units for color temperature vs. thermodynamic temperature.
– Support for Celsius in addition to Kelvin. – Support for electrical illuminance, luminous flux, luminous intensity, luminous efficacy, and pressure.
Bug Fixes:
– Avoid potential crash when storing IFC GUIDs in the file after export.
– Export styled items for extrusions if exporting solid models via the alternate UI.
– Fix parameter scaling for many parameter types when exporting schedules as property sets.
– Fix regression where items that should have been contained in an IfcSpace were no longer attached to either the IfcSpace or the IfcBuildingStorey.
– Improved control over exporting reveals and wall sweeps.
New version of IFC Exporter for Revit (v2.13/v3.5) and IFC Export Alternate UI for Revit (v1.13/v2.5) available
29 torsdag aug 2013
2013:
IFC Exporter for Revit 2013 (v2.13):
http://apps.exchange.autodesk.com/RVT/Detail/Index?id=appstore.exchange.autodesk.com%3aifcexporterforrevit%3aen
IFC Export Alternate UI for Revit 2013 (v1.13):
http://apps.exchange.autodesk.com/RVT/Detail/Index?id=appstore.exchange.autodesk.com%3arevitifcexportalternateui%3aen
2014:
IFC Exporter for Revit 2014 (v3.5):
http://apps.exchange.autodesk.com/RVT/Detail/Index?id=appstore.exchange.autodesk.com%3aifcexporterforrevit2014%3aen
IFC Export Alternate UI for Revit 2014 (v2.5):
http://apps.exchange.autodesk.com/RVT/Detail/Index?id=appstore.exchange.autodesk.com%3arevitifcexportalternateui2014%3aen
What’s new for IFC Exporter for Revit v2.13/v3.5:
General
– Initialize GUIDOptions so that GUIDUtil.CreateGUID(element) can be used outside of the exporter code.
– Remove filterView argument from many functions; used cached value instead.
– Various minor optimizations to slightly improve the time to export.
New Functionality
– (R2014 only) IFC4: Allow export of 0 thickness material layers.
– (R2014 only) IFC4: Export IfcFootingType (IFC2x3: use IfcTypeObject instead) for wall-based footings only.
– Allow export schedules as custom property sets. The name of the schedule is the property set name; the column names are the IFC parameter names.
– Allow export of solid models, which allow for mixing Brep and extrusion geometries for an entity. This can result in smaller IFC files.
– Export IfcCurtainWallType (IFC2x2: use IfcTypeObject instead).
– Export the currently selected non-primary design option when exporting in current view only mode.
– Use the base level parameter of an element to determine which level to associate the element to; use geometric containment only for cases where this is no base level.
Bug Fixes
– Don’t export some extraneous local placements.
– Don’t export type if instance isn’t exported for family.
– Fix Pset_CoveringCommon: Thickness -> TotalThickness
– Generic rework of how instance and type properties are assigned to IFC entities. If an exported entity has a related type object, then the entity will have the instance properties assigned, and the type object the type properties. If there is no type object, the exported entity will contain both instance and type properties. This should also remove any repetition of exported property sets.
– Look at all “ZoneName X” shared parameters for a room even if some have no value. This still assumes that they are sequential (i.e., if there is no “ZoneName 4” shared parameter at all, “ZoneName 5” will not be processed).
– Prevent export of IfcPolyLoops with less than 3 vertices.
– Properly scale all known Revit parameter types to the units specified for the IFC file. Note that there are potentially many Revit parameter types that map to one unit type (e.g., PipeSize, WireSize, and Length are both length parameters); we do not create different units for each of these, but instead use the main unit type.
– Respect visibility options of curtain wall panels and mullions when exporting in current view only mode.
– Use category id as default for IfcCoverings for ceilings, floors, and roofs.
What’s new for IFC Export Alternate UI for Revit v1.13/v2.5:
New Functionality
– Add UI version number to title of the IFC Export dialog box.
– Add option to export schedules as custom property sets. The name of the schedule is the property set name; the column names are the IFC parameter names.
– Add option to export solid models, which allow for mixing BRep and extrusion geometries for an entity. This can result in smaller IFC files.
– Remove option to disable surface styles on export.
– Remove option to export advanced swept solids.
IFC Exporter – Opdatering 24.07.2013
19 mandag aug 2013
Posted in Nevo Alon
Der er kommet nye opdatering til Autodesk Revit IFC Exporter. Hermed, lidt forsinket, links…
2013:
IFC Exporter for Revit 2013 (v2.12):
http://apps.exchange.autodesk.com/RVT/Detail/Index?id=appstore.exchange.autodesk.com%3aifcexporterforrevit%3aen
IFC Export Alternate UI for Revit 2013 (v1.12):
http://apps.exchange.autodesk.com/RVT/Detail/Index?id=appstore.exchange.autodesk.com%3arevitifcexportalternateui%3aen
2014:
IFC Exporter for Revit 2014 (v3.4):
http://apps.exchange.autodesk.com/RVT/Detail/Index?id=appstore.exchange.autodesk.com%3aifcexporterforrevit2014%3aen
IFC Export Alternate UI for Revit 2014 (v2.4):
http://apps.exchange.autodesk.com/RVT/Detail/Index?id=appstore.exchange.autodesk.com%3arevitifcexportalternateui2014%3aen
Updates from the previous versions are listed below. Please upgrade to the newest version!
What’s new for IFC Exporter for Revit v2.12/v3.4:
General (Revit 2014 UR1 Only):
– Added basic support for IFC4 export, corresponding to the Coordination View 2.0 MVD. Please see the Wiki for more details. This requires Revit 2014 Update Release 1 to be installed. Note that currently the ifcXML format for IFC4 is not supported.
General:
– Minor performance improvement by reducing the number of calls to the IFC export mapping table.
– This version is the Revit MEP certified version of the exporter. Revit is now certified for all 3 possible export certifications: Architectural, Structural, and MEP.
New Functionality:
– Add new MEP property sets: Pset_SanitaryTerminalBath, Pset_SanitaryTerminalShower, Pset_SanitaryTerminalSink, Pset_SanitaryTerminalWashBasin.
– Add support for IfcRelCoversBldgElements for ducts and pipes. – Allow association of property set descriptions to a specific pre-defined type of an entity.
– Allow exporting foundation and retaining walls as IfcFooting, if set in the IFC export mapping table, or using “IfcExportAs” for the particular wall.
– Export “SiteLandTitleNumber” and “SiteLongName” shared parameters from Project Information to IfcSite, if they are set.
– Optionally allow storing the generated IFC GUIDs into the project file after export. This will add “IFC GUID” parameters to elements, their types, and Project Information for Project, Site, and Building GUIDs. This requires version v2.4 of the alternate UI to set the option, and requires a manual save.
– Read in ParameterMappingTable.txt, which allows users to specify a mapping from Revit properties to IFC common parameter sets. Please see the Wiki on custom parameter mapping for more information. – Special thanks to: Tom Pesman (http://nl.linkedin.com/in/tompesman) and the Dutch Revit User Group (www.revitgg.nl / http://www.dutchrevitstandards.com) for their contribution of this improvement to the Open Source.
Bug Fixes:
– Add base equipment to the IfcSystem.
– Correct export of true north for IfcSite.
– Correct scaling of Voltage values on export.
– Move more local coordinate systems closer to the entity’s geometry.
– Properly export space containment for equipment.
What’s new for IFC Export Alternate UI for Revit v1.12/v2.4:
New Functionality (Revit 2014 UR1 Only):
– Added IFC4 Basic Coordination View 2.0 configuration, and IFC4 as a pull-down option for IFC version. This requires Revit 2014 Update Release 1 to be installed.
New Functionality:
– Optionally allow storing the generated IFC GUIDs into the project file after export. This will add “IFC GUID” parameters to elements, their types, and Project Information for Project, Site, and Building GUIDs. This requires v3.4 of the exporter to add the parameter values, and also requires a manual save.
– Report which property sets are being exported on a single line in the detail section of the first export screen.
BIM Workshop
19 mandag aug 2013
Posted in Nevo Alon
Act2learn TEKNOLOGI inviterer til: Seminar om BIM Workflow.
Mød BIM Architect Thomas Graabæk fra BIM Equity A/S.
Torsdag d. 19 september kl. 10:00-15:00
New version of IFC Exporter for Revit (v2.11/v3.3) and IFC Export Alternate UI for Revit (v1.11/v2.3) available
17 mandag jun 2013
Tags
You are getting this message because you downloaded a version of IFC Exporter for Revit or IFC Export Alternate UI for Revit prior to June 14, 2013. We have posted an update to both, which you can get to using the links below:
2013:
IFC Exporter for Revit 2013 (v2.11):
http://apps.exchange.autodesk.com/RVT/Detail/Index?id=appstore.exchange.autodesk.com%3aifcexporterforrevit%3aen
IFC Export Alternate UI for Revit 2013 (v1.11):
http://apps.exchange.autodesk.com/RVT/Detail/Index?id=appstore.exchange.autodesk.com%3arevitifcexportalternateui%3aen
2014:
IFC Exporter for Revit 2014 (v3.3):
http://apps.exchange.autodesk.com/RVT/Detail/Index?id=appstore.exchange.autodesk.com%3aifcexporterforrevit2014%3aen
IFC Export Alternate UI for Revit 2014 (v2.3):
http://apps.exchange.autodesk.com/RVT/Detail/Index?id=appstore.exchange.autodesk.com%3arevitifcexportalternateui2014%3aen
Updates from the previous versions are listed below. Please upgrade to the newest version!
If you do not wish to receive upgrade notices, please reply and I will make sure you don’t get these notices in the future.
Regards,
Angel Velez
Senior Principal Engineer
Autodesk, Inc.
P.S.: Please note that the SourceForge site has slightly newer versions of the exporter (v2.11.2, v3.3.2) that include support for the new Dutch Revit Standards. If this is of interest to you, please go to http://sourceforge.net/projects/ifcexporter/files/?source=navbar. The SourceForge changes will be included in the v2.12/v3.4 exporter updates for the App Store.
What’s new for IFC Exporter for Revit v2.11/v3.3:
New Functionality:
– #CV-2×3-166: change the corresponding instance entity class for IfcSpaceHeaterType from IfcEnergyConversionDevice to IfcFlowTerminal.
Bug Fixes:
– Assign correct Revit internal properties for elements in containers.
– Allow MEP zones to export Pset_ZoneCommon, fix 2 property names.
– Fix export of multi-story ramps.
– Fix orientation of some connectors.
– Properly calculate Ceiling:Finish property. Previously, the value was not reset between ceilings, resulting in an ever-growing list of finish materials.
– Prevent duplicate GUIDs for some elements and Psets that re-used the same GUID values. Note that this will have the effect of a one-time change of GUID values for some IfcPropertySets.
– Stop duplication of Cartesian points in the output of some BReps.
What’s new for IFC Export Alternate UI for Revit v1.11/v2.3:
New Functionality:
– Added “Use coarse tessellation for some BReps” option, defaulting to true.
Revit 2013 Servicepakke 3
17 mandag jun 2013
Tags
Servicepakken for alle 4 Revit 2013 versionerne er udgivet.
Key fixes (as per documentation):
Improves stability when using Hardware Acceleration, Graphics Mode.
Improves stability when opening projects which utilize Extensible Storage.
Improves visual fidelity between canvas and printed output.
Improves visual fidelity of hidden lines, MEP pipe centerlines and haloed gaps when not using Hardware Acceleration, Graphics Mode.
Improves Structural family data integrity during upgrade of project.
Improves data integrity when canceling Save As operation.
Improves interaction between Revit Server 2013 and Riverbed compression.
Enables users to browse Revit Server Networks when a bound workstation cannot contact the Domain Controller.
Dave Baldacchino informs us that this update includes the Hotfix that fixes some nasty non-WYSIWYG bugs (when printing in vector):
Anyway, I also checked that the recent Update 3 (for OneBox)incorporates this hotfix as well, so just skip it altogether and install Update 3 as fast as you can. There are separate downloads for the stand-alone packages.Kilde: http://whatrevitwants.blogspot.dk/2013/06/revit-2013-update-release-3.html?utm_source=feedburner&utm_medium=feed&utm_campaign=Feed:+WhatRevitWants+(What+Revit+Wants)
Link for RVT (Onebox):
http://usa.autodesk.com/adsk/servlet/ps/dl/item?siteID=123112&id=21891257&linkID=21208796
Link for RAC:
http://usa.autodesk.com/adsk/servlet/ps/dl/item?siteID=123112&id=21890399&linkID=9273944
Link for MEP:
http://usa.autodesk.com/adsk/servlet/ps/dl/item?siteID=123112&id=21891036&linkID=21208796
Link for RST:
http://usa.autodesk.com/adsk/servlet/ps/dl/item?siteID=123112&id=21890545&linkID=21208796
Guide Grids I Revit? Hvad er det?
13 tirsdag nov 2012
Posted in Revit
Tags
Guide Grid i Revit er en funktion som ikke mange bruger og forleden blev jeg bekræftet i dette udsagn til Open Doors Eventet med Autodesk Revit Professional Certificering. Der kunne jeg fornemme at der er flere der er i tvivl om hvad det endelig er.
Er du også i tvivl? så kig med i denne kort film udarbejdet af Revit OpEd.
Opdateringer for Revit 2013 produkter
21 søndag okt 2012
Posted in Revit
Tags
Opdateringer for Revit 2013 produkterne er udgivet og kan findes på følgende hjemmesider:
Autodesk Revit Architecture 2013 UR2
Autodesk Revit Structure 2013 UR2
På siderne kan du læse yderligere vedr. installationen.
nevoalon.wordpress.com 